To get the best result from a good shave, it is
important how well you look onto hygiene and the way of shaving. The world is
divided and there are many people who opt for both the dry and the wet shave.
Whichever ways you choose make sure you have the right materials and utensils,
so that you always get the best results.
The razor is the most important tool, make sure it is
thoroughly cleaned and the blades are changed and dried after each shave.
Nothing can be more harmful than getting a shave form a rusty blade. These
problems usually arise from the traditional razors where the blades had to be
fit inside the holder on a handle. People who use such razors are advised to
remove all the parts and clean the entire apparatus, edge to edge and then
assemble it.
Original Article at Rasierer
pflegen
This should be done before each shave, though it is
time consuming, but it saves you from a
lot of potential health risks, like skin itching and irritation. There are also
some use-and throw razors used in wet shaving. These should also be cleaned
thoroughly and should not be used for more than 3-4 uses.
For people who haven’t used electric shavers, it may
look a lot complicated at first sight, and many people might not go for even
cleaning it. This is wrong, even the electric razors can be cleaned thoroughly.
First the foils to be removed from the holders and then it can be cleaned using
damp cloth or brushes.
Cut whiskers and brushes are used to clean the cutters
and the hair chamber; you can also apply oil to it, if you wish, for better
running. You can also remove the entire knife block from the shaver, but this
is limited in many devices. Those electric shavers having rotator blades should
be cleaned regularly, by removing the blades from each foil and treating them
with few drops of oil for better working.
The trimmer should also be cleaned properly. Most of
the electric shavers come with their cleaning brushes, which have fine whiskers
for better cleaning. Most of them can also be easily be opened up and assembled
back and are water resistant so that you can use liquid cleaning agents for the
process.
No comments:
Post a Comment